Private Water Supply Wells
Welcome to the Iowa DNR Private Water Supply Well web site. The Private Well Program provides regulatory oversight on a number of different types of vertical boreholes and borings that meet the legal definition of "well" in our state. Safe drinking water is a high priority for most well owners. This webpage describes the common well types found in Iowa and provide you with some information about construction requirements and basic water quality concerns.
The following fall under the classification of private wells in Iowa:
- Private potable water supply wells like farm or home water wells. This includes any water supply that is not classified as a Public Water Supply under federal and state rules.
- Private wells used on livestock farms and in industry. Examples include commercial water supply wells, manufacturing and processing water supply wells; cooling tower water supplies; and any other water well that supplies water for non-drinking purposes.
- Irrigation wells for all uses including row crop irrigation, turf production, watering for truck gardens; water supplies for turf production and home yard irrigation.
- Nonpublic use test, observation and monitoring wells use to determine the quantity or quality of the groundwater or to monitor water groundwater levels, and monitoring wells look for contaminants in the groundwater.
- Temporary or permanent dewatering wells used to artificially lower water tables for new and existing construction.
- Geothermal heat exchange water supply and reinjection wells used to exchange heat from a structure to the groundwater.
- Geothermal Heat Exchange (GHEX) closed loop boreholes used to exchange heat from a structure with the earth.
- Direct push type technology boreholes for groundwater sampling when well casing and/or well screen is installed in the ground.
The Private Well Program rules only apply to water supply wells and systems that serve fewer than 25 individuals on a daily basis. If a well system provides water to at least 15 service connections (like campground spaces or condos not served by a privately held water supply) or serves 25 or more individuals, the system is a Public Water Supply and is managed under Iowa's Public Water Supply Rules.
Examples of smaller water systems that meet the Public Water Supply definition includes but is not limited to:
- rural churches,
- rural restaurants and bars,
- rural industrial or manufacturing facilities,
- rural trailer parks,
- rural wineries,
- rural conference or meeting halls,
- certain rural day care facilities,
- and any other place that is not connected to a municipal or rural water public water supply where the public gathers or conducts business and 25 or more individuals have access to the water on a daily basis.
Public Water Supplies have specific federal requirements to help protect the health of the water users and the integrity of the water system. These requirements address the design of the water well and water treatment systems as well as the storage and distribution systems. The design and construction of these facilities must follow approved specifications and standards as determined by the Iowa DNR Water Supply Engineering section. In addition, a Public Water Supply must manage and monitor the water system according to an operation permit issued by the Iowa DNR Water Supply Operations section. These steps help ensure that the water used by the public is safe for consumption. To find out if you are a Public Water Supply or for more information regarding Public Water Supply requirements, contact the IDNR Water Supply section at 515- 725-0282.
The Private Well Program provides administrative oversight of the statewide private well program. This includes rule development and interpretation, working cooperatively with local county governments to administer the private well program at a local level, working with well contractors regarding minimum and appropriate standards for well services, and providing guidance to private well owners and other citizens.
The goals of the Iowa DNR Private Well Program are to:
- Protect the groundwater resources and public health by establishing well construction, well maintenance and well plugging standards.
- Establishing well contractor certification requirements for all types of boreholes that meet the definition of "well."
- Provide a source for accurate and meaningful guidance to help answer questions pertaining to the private well program areas.
To help achieve the program goals the Private Well Program works with local county environmental health staff to issue private well construction permits at the local level. This relationship is an important part of the program and helps to ensure that there are local contacts to provide well construction permitting and support for the local residents.
The Private Well Program also works with the Iowa DNR Operator Certification Section to help Certified Well Contractors with their certification questions and testing, and helps training providers determine if a training event will qualify for continuing education units (CEUs) or "contact hours" for well contractor certification.
Iowa DNR private well construction permits are issued at the local level through the use of a web based private well permitting system named the Private Well Tracking System or PWTS. This allows the counties to issue state private well construction permits, as well as record and track well water testing reports, well renovation reports and well plugging reports.
Well Basics - Water supply wells generally fall into four categories
- Drilled or Cased Wells - Drilled wells for home, farm and light commercial use are generally 8" or less in diameter and obtain water from alluvial sands, inter-till sand and gravel deposits, deep valley aquifers or bedrock aquifers that can hold and transmit water - like porous or fractured limestone and sandstone. In Iowa, it is common to find drilled well depths ranging from 40' - 2000' deep depending on the quantity of water needed and the quality of water desired. Industrial well users and large drinking water suppliers use wells that can be as large as 30" in diameter and have a well depth that exceeds 2000'. Drilled wells make up the majority of the new well installations in Iowa and when placed, constructed and maintained properly, drilled wells are the most dependable and safe source of drinking water.
- Bored or Augered Wells - Bored wells are mainly found in areas that have too little aquifer thickness to support normal household needs through the use of a drilled well. These types of wells are commonly called "seepage wells" because of the manner the well accumulates groundwater from shallow formations that "seep" water. They are also called "cistern wells" because of the large diameter offers many gallons of water stored in every foot of casing below the water level. It is common to find bored wells up to 48" in diameter. This large diameter allows the well to hold a large volume of water when installed below the water table. The larger quantity of stored water can help sustain the peak water demands of the well user. In Iowa, most bored wells are found in the areas of central, south central, and western parts of the state where the ancient glaciers once rested. Although a bored well can provide an adequate water supply, it is common for bored wells to produce less water than our modern household needs require. In addition, many older bored wells have a difficult time providing safe drinking water. The bored wells installed prior to 1982 usually have fewer protective construction features which results in poor water quality when compared to bored wells installed after 1982. Newer bored wells may use materials similar to drilled wells. When newer construction methods are used and the bored well is properly located, constructed and maintained, they can provide a dependable and safe source of drinking water.
- Driven or Sandpoint Wells - This type of well is usually found in alluvial river basins and adjoining low laying areas nearby rivers, streams and waterways. These wells are generally 2" or less in diameter and are often less than 30' in depth. A sandpoint well is installed by joining a screened drive point (or sandpoint) to short lengths of pipe and physically driving the assembly into a shallow sand and gravel aquifer. Although a sandpoint well can provide safe drinking water when properly located, maintained and protected, the department does not recommend using a sandpoint well as a potable drinking water source due to the uncertainty of the shallow groundwater sources that sandpoints utilize.
- Hand Dug Wells - This type of well is not permitted for new construction any more, but they are common on older homesteads built before 1940 that are located on property that is underlain by glacial till. Hand dug wells are generally 36" in diameter and larger. Some of the largest hand dug wells in the state have been documented as large as 36 feet in diameter. As the name implies, these wells were constructed using hand labor (along with machine labor for extremely large diameters) to excavate a borehole. The borehole could be lined with brick, field stone, or even wood. Hand dug wells exhibit poor water quality due to the combination of utilizing the most shallow groundwater and being constructed of materials that do not block out surface water or shallow groundwater. They are also a safety hazard because the well top and opening is often poorly maintained and protected. Each year in our country, many individuals die or are severely injured due to falling in poorly protected hand dug wells. The Iowa DNR does not recommend that you use a hand dug well as a source for drinking water. If your property has a hand dug well, we urge you to properly plug the well to help protect the groundwater and improve the safety of your property.
Standards Required for Well Installation
Construction Standards To ensure that you have the best opportunity to use a safe and dependable groundwater resource, the Iowa DNR sets minimum standards for both the well construction and the contractor you hire to install your water supply. The private well construction standards are a statewide "minimum" standard. Some geological conditions and aquifers may require more stringent standards for well construction to ensure that your well can supply the highest quality drinking water possible for your location. Please consult with an Iowa DNR Certified Well Contractor to learn more about what role well construction has in protecting your resource. Below are five areas that are covered by statewide private well rules.
Certified Well Contractors - The installation of all water supply wells in Iowa require that the homeowner hire an individual Iowa DNR Certified Well Driller to perform the well construction or perform the actual work themselves. All well construction must meet the minimum construction standards for the area of installation. Although you can perform you owner well services on your own property, the Iowa DNR does not recommend that you perform any well services. This is because well services are specialized work that requires knowledge, skill and specialized tools. Plus, this type of work can be dangerous to your personal safety and the groundwater. In addition, should you complete part of the job and then require a certified well contractor to finish the work, it may cost you more than if the contractor performed all of the work on your well project. When you hire a well contractor, make sure that they are currently certified to perform well services in Iowa.
Construction Standards Statewide well construction standards offer minimum levels of well protection but some areas of the state may require greater protections be used in the construction of the well. Increasing the amount and depth of casing to avoid poor quality groundwater and/or grouting the well to a deeper level will help ensure long term protection to the water supply well and aquifer are specific to the region the well is located.
Water Testing - We require that all water supplies wells be tested to determine if the water is safe to drink when the well is newly constructed or when the well is serviced or repaired. It is the well owner's responsibility to insure that the testing is completed and that the well users are informed of the outcome of the testing - safe to drink or unsafe to drink.
Well Repair and Maintenance - All well service work and repair must meet Chapter 49 standards including well disinfection and water testing.
Well Plugging - When a well is no longer needed or is in a state of repair that eliminates the possibility of repairing the well for use, the well must be abandoned and properly plugged.
Special Considerations for Drinking Water Wells Located in Karst Bedrock Conditions
The term "Karst"
refers to terrain characterized by the presence of easily dissolved bedrock (limestone and dolomite) near the ground surface. Because carbonate rocks can be dissolved by groundwater, karst areas are often characterized by sinkholes, springs, and losing streams - a stream where some or all of the surface water is diverted into the groundwater system through bedrock surface features that connect the stream bed to openings in the bedrock below the stream bed.
The picture on the left shows a segment of a loosing stream. You can see where this feature allows the stream water to enter the bedrock and become part of the groundwater system.
The shallow groundwater located in or near Karst areas can be highly vulnerable to contamination because contaminants can travel quickly from surface water to the local shallow aquifers through features like losing streams, sinkholes, and bedrock fractures and cave systems. This bypasses the natural tendency for water to be filtered by the soils which provide natural water treatment processes.
Because of its potential surface influence and the prevalence of agriculture and livestock in Karst regions of our state, localized contamination of karst aquifers with nutrients, pesticides, and bacteria can be a concern. Contaminated aquifers should not be used for drinking water purposes unless proper water treatment is used and maintained.
Although Karst features can be found in a number of locations across Iowa, they are most abundant in the NE corner our state.
The Karst maps found on either side of this text are available to help you determine if your property is located on or nearby Karst bedrock features.
When you live in a Karst area and use a water supply well for your drinking water needs, it is important to understand how protected your water source is based on your specific location, the land use practices in your area, your well's construction, and most importantly of all - frequent sampling and analysis of your well water . With this additional information you will be able to understand the quality of your drinking water and any health risks that can be attributed to the shallow groundwater.
Most modern water supply wells include protective construction features designed to exclude the shallow groundwater associated with Karst terrain. These features include setting the well casing to a greater depth to exclude the upper groundwater; full depth grouting/sealing of the well casing to help reduce/eliminate the chance that shallow groundwater will move downward along the well casing and into the well; and utilizing groundwater from only known deeper, protected and safe aquifers. If you live in a Karst area and are considering a new well, make sure that you hire only Iowa DNR Certified Well Drillers and ask them to document what construction features they will use to help protect your well and drinking water quality.
Older water supply wells - especially those constructed before 1982 - may or may not have adequate protections in place to ensure that your well obtains its water from deeper, protected aquifers. If you have an older water supply well or if you do not know the depth and construction details of your water supply well, you should have your well water sampled at least on a yearly basis so that you know the water is safe to drink. You should also consider hiring an Iowa DNR Certified Well Contractor to perform a thorough well inspection to try and determine if your well includes construction features that will help ensure the well only accesses water from a known safe aquifers and that your well provides safe drinking water.
If you live in an area of Karst terrain and your well obtains its water from shallow groundwater sources that have been proven to be unsafe to drink and renovating or replacing your well is not an option, you should use a known safe alternative source for your drinking water needs or consider the use of a "reverse osmosis" water treatment system at each point of use where you want to obtain your drinking water. Reverse Osmosis systems when properly designed, installed and maintained, can provide you with a safe source of drinking water under Karst conditions.
To learn more about water testing for your private well, you can contact:your local county environmental health specialist, the State Hygienic Laboratory or the Iowa DNR Private Well Program.
Natural Arsenic in Private Drinking Water Supplies
Arsenic is a naturally occurring element that can be found in many locations in our state. It usually occurs in conjunction with certain sulfide minerals that are deposited as part of our soil and bedrock formations. The environment that created the arsenic deposits is a result of millions of years of accumulation, sedimentation and erosion.
Traces of arsenic can be found in water sources including groundwater, lakes, rivers and oceans. Foods like fruits, vegetables and seafood can also contain trace amounts of arsenic. Since arsenic is a natural part of our environment, everyone is exposed to small amounts of this element during their lifetime.
Arsenic can be found in groundwater sources that supply water supply wells. Because of this, it is important for all well users to understand if their water supply contains any arsenic. Neither state nor federal governments have set minimum drinking water quality standards for private wells and there are no requirements for mandatory testing except for coliform bacteria and nitrates - at any time a well is newly constructed or repaired. This means that it is the responsibility of the well owner and the water users to perform testing on their own private sources so that they understand the quality of their drinking water and any adverse health effects the water may pose.
A recent study by the University of Iowa tested 475 private wells for various contaminants. Out of this group, eight percent (8%) of the wells were found to have arsenic levels above the health threshold. The map to the right provides a basic view of the test results. The red dots indicate arsenic levels above the maximum recommended levels and the blue dots indicate is arsenic present but at levels below the maximum recommended levels.
Because of the potential health risks that arsenic poses, public health and environmental health officials encourage all private well owners to have their wells tested for arsenic at least one time. This testing will provide the well owner and water user(s) with important information on any health risks that arsenic may pose. In general, the cost for arsenic testing is approximately $20 per sample. Additional information on arsenic testing can be obtained by viewing the State Hygienic Laboratory arsenic web page.
If a private well user discovers that arsenic is present in their water supply and the levels pose a health risk, there are water treatment options that help reduce or eliminate the risk from arsenic. Treatment systems designed to reduce or remove arsenic include reverse osmosis water treatment systems, water distillers, or one or more water filter beds that contain activated alumina. Because it is not necessary to treat all of the water in a home, the household drinking water needs can be met by installing a “point of use” treatment system at a convenient location like the kitchen sink, or the water tap on the refrigerator and ice maker.
Information about arsenic treatment options is available in an informational brochure from the State Hygienic Laboratory at the University of Iowa. The booklet is titled "Well Water Quality and Home Treatment Systems." Additional information on home water treatment devices can be obtained from a Water Systems Council information page titled "Drinking Water Treatments."
All water treatment systems advertised for sale or sold in Iowa must be registered with the Iowa Department of Public Health (IDPH). Please visit the IDPH web site for more information. It is recommended that a licensed plumber install the system and that the water user understand the periodic maintenance and testing that the system requires. It is important to consult with a water treatment system sales professional to determine what types (species) of arsenic is present in the well water so that the correct system for arsenic removal is purchased. For more information or questions regarding home treatment systems, contact Randy Lane at IDPH, 515-281-5894, email@example.com.
When choosing a water treatment system to reduce or remove arsenic, it is important to consult with a water treatment system sales professional to determine what types (species) and levels of arsenic present in the well water. In some cases, arsenic removal is a multi-step process and requires additional treatment equipment. Understanding the arsenic in your water supply will help ensure that the water treatment system that you consider will perform properly and provide you with safe drinking water. Once you have chosen the treatment system, we recommended that a licensed plumber install the system and that the water user be trained on system operation, periodic system maintenance and water testing to confirm that the system provides adequate water treatment. For more information or questions regarding home treatment systems, contact Randy Lane at IDPH, 515-281-5894.
Additional information on specific water treatment products is available from the National Sanitation Foundation.
People can experience adverse health impacts if they are exposed to arsenic levels over a period of years that are significantly above the federal public drinking water standard. Individuals who feel they may be experiencing health problems related to arsenic exposure can contact the Iowa Department of Public Health for additional information.
The Iowa DNR informational document "Arsenic in Iowa's Drinking Water."
Environmental Protection Agency Arsenic information
Read our "Private Well Testing" web page for additional water testing information.
General Drinking Water Resources
The following web resources are provided for your convenience and will provide you with additional information on private water supplies.
- US Environmental Protection Agency's publication "Drinking Water From Household Wells."
- The Water Systems Council's wellcare© hotline provides information for private well owners. Call 888-395-1033 or visit their website at www.wellcarehotline.org
- Iowa Farm*A*Syst/Home*A*Syst provides fact sheets and worksheets to help farmers and rural residents assess pollution risks and develop management plans geared toward their circumstances. For example, Farm*A*Syst helps farmers and ranchers identify pollution risks from nitrates, microbes, and toxic chemicals. Home*A*Syst reaches homeowners who face pollution risks from faulty septic systems, pesticide use, petroleum leaks, and hazardous waste disposal.
- American Ground Water Trust, a non-profit education organization providing information to the well owner.
- The American Water Works Association is an international nonprofit scientific and educational society dedicated to the improvement of drinking water quality and supply.
- Web link for the Centers for Disease Control and Prevention. has information on private drinking water wells and your health.
- The Ground Water Foundation is a nonprofit organization dedicated to educating and motivating people to care for and about ground water.
- National Drinking Water Clearinghouse, a public service organization that collects, develops, and distributed timely drinking water-related information. Sponsored through the US Department of Agriculture's Rural Utilities Service.
- The National Ground Water Association's Wellowner.org can provide information to consumers on ground water and water wells through their consumer web site at wellowner.org.
- The National Groundwater Association is a national organization representing well contractors and groundwater scientists.
- The Iowa Water Well Association is a statewide organization of water well professional in Iowa.
- For more information contact -
Russell Tell, Environmental Specialist Senior
Wallace State Office Building
502 E. 9th Street
Des Moines, IA 50319-0034
(515) 725-0462 or by Fax: (515) 725-0348