Did you know that if you drink water out of a private water supply, you should be testing your water source at least once each year or anytime that you believe a problem exist with the water?
This page offers answers to a number of frequently asked questions receive about testing the water obtained from private wells and private water systems.
- Choose a topic -
Why should I test my water supply?
The groundwater that supplies your water supply well can become contaminated in a number of ways - through both natural and human related activities. Even if you believe that your well water is safe to drink, it is important to periodically test your well water to assess the safety of the water and to help make decisions on well maintenance, water treatment or to determine if you need an alternative source of drinking water.
Groundwater can have unsafe levels of natural pollutants such as, such as arsenic, lead and radon, and human related contaminants like fuels used to power your vehicles and implements, the solvents that help clean your clothing, homes and businesses and the chemicals that are beneficial for industrial and agricultural use. The degree to which a potential health threat may exist depends on the amount and type of the contamination and how you use the water. In some cases, contamination of the water can be detected by sight, taste or smell; however, in most instances the contamination can only be detected through laboratory analysis of the water.
Back To Top
How often should I test my water supply?
The goal for water testing is for you to have access to the information that allows you to make informed decisions about drinking the water. To help provide you with this information we recommend that bacteria and nitrate testing be performed at least once per year. Arsenic testing should be done at least one time on each drinking water well, or more often if you are in an area where other wells exhibit a change in arsenic levels. Depending on the problems you observe with your well water (changes in color, taste, odor, hardness, corrosion, sediment, etc.) and the land use in areas nearby your well, you may want to test for additional contaminants and/or test more frequently to look for changes.
There are other times when it is important to have your well water sampled and tested. These include anytime you have your well or pump repaired or have any work done on the water distribution system - like replacing pressure tank and/or pressure switch, fixing water line leaks, the addition of new water lines, adding waterers or yard hydrants, anytime an electrical outage has lasted long enough for the water system to loose all pressure, anytime the well has sat idle for a long period of time without being used and anytime flood water has access to the well or areas nearby the well.
Back To Top
When is a good time to test my water supply?
You should have your private well sampled and the water analyzed at least once each year and
anytime you notice your water undergoes some type of change. Changes in the water quality can indicate that there may be a problem with the safety of your drinking water. These indicators can be obvious like cloudiness, floating debris or sediment, unusual odors and colors, but in many cases your water may appear normal but is no longer safe to drink. If there is any doubt that your water supply is not safe to drink, we strongly recommend that you use an alternative known safe source for drinking water - like bottled water until you have your water tested and is proven safe.
Iowa also presents wells with four distinct operational seasons - summer, fall, spring and winter. Each of these seasons can alter the manner in which you trouble-shoot well water quality problems. Although private drinking water sampling and analysis can be done at any time, some contaminants may be present only during parts of the year. Because of this, we recommend that routine testing be performed during times when contaminants are most likely to be present.
Coliform bacteria and nitrate are most likely to be found during wet weather, when runoff and excess soil moisture carry contaminants into shallow groundwater sources or through defects that may exist in your well's casing. In general, the wet periods of late spring and early summer as well as the wet periods of the fall are good times to test for bacteria and nitrate.
Pesticides used on the lawn, garden, or farm fields are likely to be present in greatest concentrations (if at all) soon after they are applied. With the exception of large chemical spills, it takes excess soil moisture to carry pesticides into the ground. So once again, late spring and early summer are good times to test for pesticides if they are of concern to you.
Back To Top
What should I test for?
Private drinking water analysis normally looks for the common water drinking quality indicators from your region whose presence may mean that the well and water system is not safe to drink.
At a minimum, you should test your private drinking water supply for coliform bacteria
. These contaminants are the two most common indicators used to provide basic information on drinking water safety. It is easy and inexpensive to test for these contaminants. Their presence above the set maximum contaminant levels (MCL) indicates that you should not drink the water without proper treatment or water system repairs or well replacement.
There are a number of other contaminants that you may want to test for based on your location in the state, the location of the well, the aquifer supplying your water, the age of the well (construction standards), and the land use or land history nearby your well. Contaminants like arsenic
, and lead
are naturally occurring in some aquifers and may require specialized water treatment to reduce or eliminate the exposure risk. Certain locations may be susceptible to contamination from things like Volatile Organic Compounds
(VOCs) such as gasoline, plastics, adhesives, dry-cleaning fluids, refrigerants, and paints and solvents; pesticides
, which include a large group of compounds used to control animal and plant infestations; animal waste
like manure and carcasses; in some cases other emerging contaminants
that may be linked to our modern lifestyle.
These contaminants can end up in the groundwater due to local use and application, improper handling, storage and application, improper disposal, accidental spills, improperly abandoned wells, or lack of natural protections in the local geology that normally provide protection to the aquifer. If the natural protective features/barriers are not present in your region, the aquifers are more susceptible to contamination.
In the northeast region of Iowa Karst bedrock features allow surface water more immediate access to the shallow groundwater. This makes the groundwater more susceptible to surface contaminants. Water supplies in this part of the state require additional more stringent standards for well construction as well as additional water treatment and water quality monitoring. For additional information on Karst terrain please view our Water Supply Wells web page
If your water supply lacks adequate protections, is in poor repair, or utilizes an aquifer that interacts with surface water or very shallow groundwater, you should be especially aware of water borne diseases. Bacteria, viruses and protozoa are microorganism groups containing pathogens that can cause waterborne diseases. If you believe that your drinking water has made you ill, you should obtain your drinking water from only a known safe water source and contact a physician's office immediately to discuss your symptoms. Your water supply should also be sampled and analyzed at an approved drinking water laboratory for the appropriate microorganisms. For additional information on water borne diseases please see the Centers for Disease Control
, Iowa Department of Public Health
or your local county environmental health office
For advice on what your well should be tested for based on your well location and aquifer please contact your local county environmental health office
, the State Hygienic Laboratory
, the Iowa Department of Public Health
or the Iowa DNR.
Back To Top
Who can perform the water sampling?
The well owner, the well users or their agents, or any number of health and environmental health specialists can obtain a water sample from your water system for testing. Since the water analysis will normally be looking for health indicator bacteria, it is important that the water sampling be performed with great care so that the sample is not accidently contaminated leading to a false indication that the water system is contaminated. If you are unsure about sampling technique, call your local county environmental health office to obtain information on how you can have a water sample taken by experienced county staff.
For additional information on how to correctly obtain a water sample for testing, please refer to theState Hygienic Laboratory private well sampling State Hygienic Laboratory private well sampling information sheet.
Most of Iowa's counties participate in the Grants-to-Counties Well Program. The Grants-to-Counties program will provide free water sampling and analysis to qualifying private drinking water systems. To find out if your county participates in the Grants-to-County Well Program or to arrange sampling of your water system, please refer to the list of County Environmental Health Sanitarians and contact the Sanitarian's office in the county where the well is located.
Back To Top
Can any lab perform the water analysis?
For water testing paid for under the Grants-to-Counties Well Program or the required water testing for new well construction or well repair, the Iowa DNR requires that the water testing laboratory be certified by the Iowa DNR for drinking water analysis. Iowa DNR Certified laboratories use accepted lab methods, employ staff who are qualified to perform the water analysis, and use DNR accepted standard operating procedures to help ensure accurate test results and the most reliable information for you.
To obtain additional information on well water testing or to order a water sample test kit, please contact the State Hygienic Laboratory at the University of Iowa or any of the other Iowa DNR certified drinking water laboratories
Back To Top
How do I interpret the laboratory report?
Each laboratory uses their own reporting form to inform you of the results of your drinking water analysis. Although the forms may look different, the information provided on each form should be nearly identical. When testing for coliform bacteria and nitrates, most lab analysis forms will state whether the water supply is "safe" or "unsafe" to use as a drinking water supply and state what the level of nitrate they found. You can also request that the laboratories provide you with a numerical level for the bacteria if you make this request at the time the water sample is submitted and you include the additional fee.
The goal of drinking water testing is to inform the water user whether or not the water supply is safe for drinking water use. Testing "safe" means that the water supply is "absent" of coliform bacteria and fecal coliform bacteria, and the nitrate level is 10mg/L or less when measured as nitrate-nitrogen or NO3- N, or 45 mg/L or less when measured as Nitrate, Total Nitrate, or NO3, and you have no reason to believe that there are other common contamination concerns with the water supply.
If you have your water tested for other types of contaminants, the Environmental Protection Administration(EPA) maximum contaminant levels and guidelines should be used to determine if your water is safe to drink.
The Water Systems Council wellcare® water testing information page offers additional guidance on understanding your water analysis report.
The State Hygienic Laboratory at the University of Iowa also offers a web page that can help you understand how to interpret private drinking water analysis reports based on their testing services.Reading your water analysis report
Back To Top
What should I do if my water supply is unsafe to drink?
First - you and your family should stop drinking the water and find an alternative source of safe drinking water. This can be bottled water, a neighboring water supply that is known safe, water from a public water supply like a neighboring town or city, or water that has been properly treated for the contaminants present in the water.
Then you should determine what the best short term and long term solutions are for your safe drinking water needs. Your options are to use bottled water for all drinking water purposes, providing adequate water treatment at one or more drinking water taps, rehabilitation or renovation of the well or water system so that it provides safe drinking water, connection to a known safe water supply, or replacement of your existing water supply.
Sometimes the well related issues that can cause drinking water contamination are simple and can be remedied by adding protections to the existing well. Other times, the only real fix will be an alternative water supply. Anytime you hire a contractor to work on your well or water system, the contractor must be certified by the Iowa DNR the proper categories of well services. Certification ensures that the individual you hire meets a minimum level of knowledge and skill in the areas needed for your job. It is important to note that you should select your contractor carefully as even though a contractor may be certified by the state, they may not have the equipment or the experience to perform all well services.
To obtain additional information on water system rehabilitation, renovation, repair or replacement, please contact your local Iowa DNR Certified Well Contractor.
To learn more about ownership of a private water supply, please look at our private well consumer information booklet.
Back To Top
Can I use a water treatment device?
Water treatment devices are commonly used to produce safe drinking water. The type of device that you need and the installation, maintenance and monitoring of your treatment device will depend on the type of contamination that you have and the type of device used for treatment. Some contaminants require very specialized water treatment so even if you already have some form of water treatment already, you may not be reducing or removing all contaminants that may cause health issues.
One last important consideration is that all water treatment devices require ongoing maintenance, monitoring and testing to ensure that they are properly treating the water. The maintenance intervals and cost vary with each specific treatment device. Make sure to inquire about ongoing maintenance schedules and cost when you discuss your water treatment options.
All water treatment devices that are sold in Iowa must undergo third-party testing and be registered under a program administered by the Iowa Department of Public Health (IDPH.) For additional information on water treatment system registration, please contact the IDPH at their water treatment system registration web page.
To learn more about water treatment device options, please look at the information on the following links:
State Hygienic Laboratory at the University of Iowa information booklet "Well Water Quality and Home Treatment Systems."
National Sanitation Association's Home Water Treatment Devices guidance web page.
Water Systems Council Home Drinking Water Treatment Systems web page.
Back To Top
Additional Web Resources
Iowa DNR Information about Arsenic in Iowa's Drinking Water
Frequently Asked Questions from the State Hygienic Laboratory at the University of Iowa
Reasons to test your water - an EPA web page
Drinking Water from Household Wells - an EPA publication
Do you have questions about your well? informational brochure by the Water Systems Council
Renting a Home with a Private Well
Water Systems Council wellcare® information series for private well owners and users
Back To Top
- For additional information contact -
Russell Tell, Environmental Specialist Senior
401 SW 7th St, Suite M
Des Moines, IA 50309-4611
(515) 725-0462 or by Fax: (515) 725-0348