Iowa DNR's Twitter Iowa DNR's Flicker Iowa DNR's YouTube Iowa DNR's Pinterest Iowa DNR's Facebook | Iowa Outdoors Magazine | News | Contact Us

Site Search  search button

Wasteload Allocation Procedures

A Wasteload Allocation (WLA) is the portion of a receiving water’s assimilative capacity that is allocated to one of its existing or future point sources of pollution.

The Iowa Department of Natural Resources is responsible for maintaining and enhancing water quality in the state.  To that end, IDNR develops WLAs for facilities that discharge treated wastewater (for example, domestic sewage treatment plants and industrial plants) into waters of the state in order to assure that the permitted effluent limits meet applicable state Water Quality Standards.  The calculation of a WLA may be based on conservative assumptions to protect the water quality under worst case scenario conditions.  Facilities can submit site-specific information on both the receiving waterbody and the discharge characteristics for consideration.

The current rule reference document that outlines WLA methodology is as follows:
Basin Plan Support Document – Introduction
Basin Plan Support Document – Wasteload Allocations

IDNR is in the process of updating this rule reference document including renaming it Wasteload Allocation Procedures. 

Draft documents:
Wasteload Allocation Issue Paper November 23, 2010
Draft Wasteload Allocation Procedures November 23, 2010


August 3, 2012 Technical Advisory Committee Meeting Agenda
Location:  502 E 9th St., Wallace Building, Des Moines, IA
Conference Rooms 3 East and West

Requesting a Wasteload Allocation:
To request a WLA, please fill in the WLA request form and send the WLA requests electronically to connie.dou@dnr.iowa.gov.

WLA Request Form and Instructions Updated 9/2011
WLA Request Form and Instructions Updated 9/2011


Site Specific Data Collection

IAC 61.2(5)”d” – Implementation Strategy states that “A wastewater treatment facility may submit to the department technically valid instream data which provides additional information to be used in the calculations of their wasteload allocations and effluent limitations.  Facilities may choose to collect site specific information in lieu of the default pH and temperature data for calculating ammonia limits.   IAC 61.2(5)”d” and 61.2(4)”g””(4)”  also allow facilities to collect site-specific mixing zone study information.

Wastewater treatment facilities are encouraged to plan ahead when considering any data gathering effort.  Many of these efforts require seasonal data particularly collected during low stream flow conditions.  For more information please refer to the Site Specific Data Collection document.

Site Specific Data Collection 03/2011

DNR Contact:
Connie Dou
(515) 281-3350
Connie.Dou@dnr.iowa.gov


Menu